After a collision, the vehicle’s structure may need to be measured and, if it is out of specification, straightened before panels and safety systems are finished. HRP Collision uses 3D frame measurement and follows the applicable manufacturer repair procedures.
Our shop at 1011 S Garfield St in Midland serves Midland and Odessa. Not every collision requires structural work. The damage and the manufacturer’s procedures determine whether measurement, straightening, or both are part of the collision repair plan.
Measure first, then decide on straightening
A damaged bumper or panel does not show whether the underlying structure has shifted. 3D frame measurement compares control points on the vehicle to the manufacturer’s specifications so the repair plan is based on recorded measurements, not appearance alone.
If the structure is within specification, straightening may not be needed. If it is out of specification, the repair plan can include frame repair and alignment as a separate operation from bodywork, refinishing, and calibration.
3D frame measurement
We measure the structure in three dimensions and compare the readings to the applicable OEM specifications. This helps confirm whether the vehicle has returned to spec during the repair and documents the result.
Frame straightening
When measurement shows the structure is out of specification, straightening is used to restore it according to the manufacturer’s repair information. The exact method depends on the vehicle and the damage—not a one-size process.
How structural work fits the rest of the repair
Frame measurement and straightening are part of a broader collision repair when the damage calls for them. Body and paint work, parts decisions, and safety-system checks follow the same plan.
- Repair information comes from the vehicle manufacturer. Confirm our listings on the OEM certified collision repair page. We prefer genuine OEM parts and work with your insurance company to get them approved. We do not promise that every repair will use only OEM parts; the part type should be identified on the estimate.
- Cameras, radar, and other driver-assistance sensors can be disturbed by a collision or by structural work. When the procedures call for a diagnostic scan and ADAS calibration, those operations are completed and documented. A scan is not the same as calibration.
- Authorized disassembly can reveal hidden damage and change the scope. If that happens, we review the added work with you and, when a claim is involved, with the insurer. See our explanation of hidden damage after disassembly.
What to expect when structural work is indicated
- Assessment and documentation. We document the visible damage and note whether structural measurement is indicated.
- Measurement. 3D measurement is used to compare the structure to manufacturer specifications and to guide the plan.
- Straightening, when required. If the structure is out of specification, frame repair proceeds according to the applicable OEM procedures.
- Related operations. Body, refinish, diagnostic scans, and ADAS calibration are completed when the vehicle and the procedures require them.
- Quality check and delivery. We inspect the completed work against the repair plan. Ask for the written lifetime warranty terms at delivery.
No repair completion date or final scope is promised before assessment.
Why choose HRP Collision in Midland
- Manufacturer certifications you can confirm on our OEM certification page for Kia, GM, Hyundai, Genesis, Jeep, Ram, Dodge, and Chrysler, plus I-CAR Gold Class recognition and ASE certified technicians.
- 3D frame measurement and, when indicated, frame straightening as part of the collision repair plan.
- ADAS calibration when the vehicle and the procedures require it.
- A lifetime warranty for as long as you own the vehicle, with written terms at delivery.
- A Midland shop, open since 2023, serving Midland and Odessa, and a BBB Accredited Business with an A rating.
Frequently asked questions
When is 3D frame measurement needed after a collision?
When the damage or the manufacturer’s procedures call for it—not on every repair, and not by appearance alone. Measurement compares the structure to specification so the plan is based on recorded readings.
Is frame straightening the same as a wheel alignment?
No. Frame straightening restores the vehicle’s structure to specification when measurement shows it is out of spec. A wheel alignment is a separate operation and is not a substitute for structural measurement or repair.
Why might ADAS calibration be needed after structural repair?
Cameras, radar, and other sensors can be disturbed by a collision or by structural work. The manufacturer’s procedures may require a diagnostic scan and calibration, not only when a warning light is on. See our ADAS calibration page.
Do you follow the vehicle manufacturer’s repair procedures?
Yes. Structural measurement, straightening, and related operations follow the applicable OEM repair information for your vehicle. Confirm our brand listings on the OEM certified collision repair page.
Where is HRP Collision, and what are your hours?
Our shop is at 1011 S Garfield St, Midland, TX 79701, serving Midland and Odessa. Hours are Monday–Friday 8:30 AM–6:00 PM, Saturday 9:00 AM–1:00 PM, and Sunday closed. Call (432) 888-1441 before transporting a damaged vehicle.
Visit our Midland shop, serving Odessa drivers
HRP Collision
1011 S Garfield St, Midland, TX 79701Hours: Monday–Friday 8:30 AM–6:00 PM; Saturday 9:00 AM–1:00 PM; Sunday closed.
Call (432) 888-1441 before transporting a damaged vehicle. If its safety is uncertain, do not drive it just to obtain an estimate; discuss transportation arrangements first.
Have your year, make, model, damage details, photos if you have them, and any existing estimate ready.

